Would it be possible to add a line to the analyze of a finished fount to reflect either the stone/wood/bone it was made from or a reflection of the precision of the original material?

right now you can make a fount out of balsa and one out of belzune and at the end there isn't any way to tell the difference. This makes hard to choose the fount you need to use in order to not waste the precision of the sigils used with the fount.

I did try to put a wax label on the belzune one but alas that didn't work.

Also, if you go to buy one at a trader shop, its impossible to tell what you are getting

Hope this made sense

Rehlyn

Well, see, there's the linchpin of why everything you're saying is wrong. There's the fulcrum. There's the centerpiece. There's the turkey on the Thanksgiving table.